M

Mason MPG Lab

TB-2024-GDI-001 Official Protocol

Ford F-150 · 2.7L / 3.5L EcoBoost · 5.0L Coyote

Stop EcoBoost Carbon Clogging Before It Destroys Your Valves.

Chemicals only clean 50% of carbon deposits. Discover how OBD-II Dynamic HHO Injection maintains 99% valve cleanliness, restores 15–22% fuel economy, and prevents $1,500+ walnut blasting.

Read DIY Protocol

99%

Valve cleanliness

Flame velocity

14,240+

Pickups diagnosed

VIN & Trim Compatibility

STEP 1/2

Select your engine

Section 01 — Diagnostic

Clogging Stage Assessment

Deposit density on GDI intake valves scales with mileage, not with fuel brand. Select a stage to inspect the measured signature.

Section 02 — Educational

The DIY PEA Treatment Protocol

Full five-step field procedure, published free as part of Technical Bulletin TB-2024-GDI-001.

Bring the engine to full operating temperature (195–210°F coolant). Cold intake runners cause PEA to condense before reaching the valve seat.

Section 03 — Permanent Solution

OBD-II Integrated Dynamic HHO Injection

01 / 03

8× Flame Velocity

Hydrogen burns roughly eight times faster than gasoline, raising in-cylinder flame front speed and eliminating unburnt hydrocarbon carryover.

02 / 03

Complete Carbon Oxidation

The faster, hotter front oxidises the polymerised carbon core that solvents cannot reach — including the deposit bonded to the valve stem.

03 / 03

Continuous Prevention

OBD-II integration modulates HHO output with load and RPM, so deposits never re-form between service intervals.

ParameterUntreated GDIChemical CleaningHHO System ◉
Valve cleanliness after 70k mi12%50%99%
Fuel economy delta−9%+3–5%+15–22%
Compression retention−15 to −25 PSI−6 to −10 PSIFactory spec
Misfire codes P0300–P0308PersistentReturns in 6–9 moNone recorded
Reaches inner carbon coreNoYes
5-year cost of ownership$1,800+$1,450$800–$1,200 one-time
Walnut blasting requiredYesLikelyNo

Verified for 2.7L EcoBoost, 3.5L EcoBoost and 5.0L Coyote platforms.

Section 04 — Financial

5-Year Total Cost of Ownership

Projected odometer in 5 years: 140,000 mi · 2 walnut-blast event(s) forecast

Chemical maintenance path

$4,300

PEA treatments, diagnostics and walnut blasting over 5 years.

HHO system path

$800

One-time OBD-II hardware. No recurring solvent spend.

Fuel saved (18%)

$2,859

At 17 MPG baseline, $3.60/gal.

Net 5-year advantage

$6,359

Section 05 — Engineering Credentials

Borescope Evidence — Intake Valves at 70,000 Miles

Borescope image of Ford EcoBoost intake valves before HHO treatment
Before3.5L EcoBoost · 70,412 mi · Stage 3 coking
Borescope image of Ford EcoBoost intake valves after HHO treatment
AfterPost 900 hr HHO cycle · 99% cleanliness

Citation

SAE 2019-01-0216 — GDI intake valve deposit morphology

Citation

SAE 2016-01-2246 — Hydrogen-enriched combustion flame speed

Quality seal

Mason MPG Lab Verified

Bulletin TB-2024-GDI-001 · 14,240 pickups diagnosed